2-3
Basic Operation
PCM 81
Each preset has a set of Soft Row assignments which we've
selected for you (as well as an assignment for the ADJUST knob).
When shipped, the PCM 81 will power up in Go mode with the first
preset (P0 0.0) loaded. Press Edit to display the Soft Row of
parameters.
Pro mode gives you access to the full parameter matrix, including
the Soft Row. Use this mode when you want to do in-depth effects
editing or patching, or when you want to customize Soft Row
assignments.
Go mode and Pro mode selection is made in Control mode at
matrix location 1.0.
0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8
2 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7
3 3.0 3.1 3.2 3.3 3.4 3.5 3.6
4 4.0 4.1 4.2 4.3 4.4 4.5
5 5.0 5.1 5.2 5.3 5.4
6 6.0 6.1 6.2 6.3
7 7.0 7.1 7.2
8 8.0 8.1
9 9.0
SELECT
Up
Down
ADJUST
DIGITAL EFFECTS PROCESSOR
PCM 81
XXXXXXX ❋XXXXXXXXXX
3.6 XXXXXXXXXXXXXXXXX
The Select knob moves you
horizontally across the matrix.
The Up and Down
buttons move you
vertically through
the rows of the
matrix.
In the Program and Register Banks, the Adjust knob acts as a
soft knob for adjustment of one or more patched effect
parameters. In the other modes, Adjust scrolls through the
ran
ou have selected.
An asterisk in the display indicates that
Load/✱ is active and, depending on the
mode, will load effects or will display
additional parameters when pressed.
Your current location in the matrix is shown
in the lower lefthand corner of the display.
Simultaneously pressing Up and Down
will always return you to 0.0.
To Next Page
Loading...
