Each preset has a Soft Row of parameters which have been specifically selected to provide
everything you need to play with the effect. This example shows the Soft Row for P0 0.0 Prime Blue.
ou press Load/✱.
Soft Row parameters are derived from the full Edit matrix (with the exception of the Patch row).
In the presets, they are arranged according to their numerical order in the matrix.
ADJUST
Turn Adjust to change
the value of a displayed
parameter.
DIGITAL EFFECTS PROCESSORPCM 81
The Soft Row Display
Edit Matrix
Row Label
Parameter
Name
Current
Parameter Value
Controls
High Cut
12.50 kHz
SELECT
Turn Select to move
horizontally across
the Soft Row.
The symbol ■ in the
upper left corner of
the display indicates
that a modulator
is patched as a
"source" controller.
The symbol ■ in the
upper right corner of
the display indicates
that a parameter
is a patch "destination."
2 2.1 2.2 2.3 2.4 2.5
3 3.0 3.1 3.2 3.3 3.4
4 4.0 4.1 4.2 4.3 4.4
5 5.1 5.2 5.3 5.4
6 6.0 6.1 6.2 6.3 6.4
7 7.0 7.1 7.2 7.3 7.4 7.5 7.6
8 8.1 8.2 8.3 8.4 8.6
0 0.1 0.2 0.4
1.51 1.0 1.2
Controls
3.5 3.6
4.5 4.6
5.5 5.6
6.5 6.6
Rvb Time
Rvb Design
FX Adjust *InLvl/Pan FX Mix
Low Rt Crossover *Ref Lvl/Dly
Diffusion Attack Spin Link Rvb Out
Patches
Patch 5 Patch 6 Patch 7 Patch 8 Patch 9Patch 4Patch 3Patch 2Patch 1Patch 0
Modulation
Mod:AR Env Mod:Env L Mod:Env R Mod:Latch Mod:Sw 2
Feedback
Panning
Master Voice 1 Voice 2 Voice 3 Voice 4
Master Voice 1 Voice 2 Voice 3 Voice 4
Voice 5 Voice 6
Voice 5 Voice 6
1.6
EkoFbk/Dly
Levels Master Voice 1 Voice 2 Voice 3 Voice 4 Voice 5 Voice 6
Delay Time
*Master Voice 1 Voice 2 Voice 3 Voice 4 Voice 5 Voice 6
Chorus
*Voice 1 *Voice 2 *Voice 3 *Voice 4 *Voice 5
*Voice 6
0.6
*ADJUST
Controls Controls Controls Rvb Time Rvb Time Rvb Time Rvb Design Chorus Mod: LFO Mod: Sw 1
Pre Delay Size *Mst Depth *Rate *RateRt HCMid RtFX WidthHigh CutMix
0.0
Mix
0.3
High Cut
0.5
FX Width
1.1
Mid Rt
1.3 1.4
Rt HC Pre Delay
2.0
Size
5.0
*Master
8.0
Mod:LFO
8.5
Mod:Sw 1
To Next Page
Loading...
