The Soft Row assigned to an effect appears above
Row 0 in the full Edit Matrix.
We have highlighted
those parameters in the
Edit matrix which have
been assigned to the
Soft Row of P 0.0 Prime Blue.
For example, FX Width, and
Mod: SW 1.
2 2.1 2.2 2.3 2.4 2.5
3 3.0 3.1 3.2 3.3 3.4
4 4.0 4.1 4.2 4.3 4.4
5 5.1 5.2 5.3 5.4
6 6.0 6.1 6.2 6.3 6.4
7 7.0 7.1 7.2 7.3 7.4 7.5 7.6
8 8.1 8.2 8.3 8.4 8.6
0 0.1 0.2 0.4
1.51 1.0 1.2
Controls
3.5 3.6
4.5 4.6
5.5 5.6
6.5 6.6
Rvb Time
Rvb Design
FX Adjust *InLvl/Pan FX Mix
Low Rt Crossover *Ref Lvl/Dly
Diffusion Attack Spin Link Rvb Out
Patches
Patch 5 Patch 6 Patch 7 Patch 8 Patch 9Patch 4Patch 3Patch 2Patch 1
Patch 0
S
(Soft Row)
Controls
S.0 Mix
Controls
S.1 High Cut
Controls
S.2 FX Width
Rvb Time
S.3 Mid Rt
Rvb Time
S.4 Rt HC
Rvb Time
S.5 Pre Delay
Rvb Design
S.6 Size
Chorus
S.7*Mst Depth
Mod: LFO
S.8 *Rate
Mod: Sw 1
S.9 *Rate
Modulation
Mod:AR Env Mod:Env L Mod:Env R Mod:Latch Mod:Sw 2
Feedback
Panning
Master Voice 1 Voice 2 Voice 3 Voice 4
Master Voice 1 Voice 2 Voice 3 Voice 4
Voice 5 Voice 6
Voice 5 Voice 6
1.6
EkoFbk/Dly
Levels Master Voice 1 Voice 2 Voice 3 Voice 4 Voice 5 Voice 6
Delay Time
*Master Voice 1 Voice 2 Voice 3 Voice 4 Voice 5 Voice 6
Chorus
*Voice 1 *Voice 2 *Voice 3 *Voice 4 *Voice 5
*Voice 6
0.6
*ADJUST
0.0
Mix
0.3
High Cut
0.5
FX Width
1.1
Mid Rt
1.3 1.4
Rt HC Pre Delay
2.0
Size
5.0
*Master
8.0
Mod:LFO
8.5
Mod:Sw 1
To Next Page
Loading...
