Installing options
Installing a 550-sheet drawer
CAUTION: The printer weighs 25.40 kg (56 lb); therefore, it requires at least two people to lift it safely. Use the
handholds on the sides of the printer to lift it, and make sure your fingers are not under the printer when you
set it down.
The printer supports one optional drawer which allows an additional 550 sheets of paper to be loaded.
CAUTION: If you are installing a 550-sheet drawer after setting up the printer, turn the printer off and unplug
the power cord before continuing.
1 Unpack the 550-sheet drawer, and remove any packing material.
2 Place the drawer in the location chosen for the printer.
3 Align the printer with the 550-sheet drawer, and lower the printer into place.
4 Set the printer software to recognize the 550-sheet tray.
a Click Start Settings Printers.
b Double-click the printer icon.
c Click File Properties.
d Click the Install Options tab.
e From the Available Options list, select the 550-sheet tray.
f Click Add.
g Click OK.
Installing options
14
To Next Page
Loading...
