To close it, fold it back down.
To extend the paper stop for longer paper sizes, start with the paper stop fully closed:
1 Grasp the paper stop at the indentation farthest from the top of the bin.
2 Rotate it up and back until it is lies flat.
3 Lift up the flap and rotate it back until it stops at a 90° angle.
To close the paper stop, fold the flap forward and down. Rotate the paper stop back into its closed position.
Setting the Paper Size and Paper Type
Note: Trays with matching Paper Size and Paper Type settings are automatically linked by the printer. When a linked
tray runs out of paper, the printer draws from another tray.
Loading paper and specialty media
35
To Next Page
Loading...
