Lexmark C530 User Manual

Print irregularities
Example Cause Solution
) )
ABCDE
ABCDE
ABCDE
Media has absorbed moisture due to
high humidity.
Load media from a fresh package
into the paper tray.
The media being used does not meet
the printer specifications.
Make sure the Paper Type and
Paper Weight settings match the
type of media you are using.
Avoid textured media with rough
finishes.
A toner cartridge is low or may be
almost empty.
Replace the toner cartridge.
Fuser is worn or defective. Replace the fuser.
Print is too dark
Cause Solution
Toner Darkness setting is too dark, RGB Brightness
setting is too dark, or RGB Contrast setting is too high.
Select a different Toner Darkness setting, RGB
Brightness setting, or RGB Contrast setting from Print
Properties before sending the job to print.
Note: This solution applies to Windows users only.
Toner cartridge is defective. Replace the toner cartridge.
Transparency print quality is poor
Cause Solution
You are using transparencies that do not meet the printer
specifications.
Use only transparencies recommended by the printer
manufacturer.
Paper Type setting for the tray you are using is set to
something other than Transparency.
Make sure the Paper Type setting is set to
Transparency.
Toner fog or background shading appears on the page
Cause Solution
Toner cartridge is worn or defective. Reinstall or replace the cartridge.
Transfer belt is worn or defective. Replace the transfer belt.
Photoconductor is worn or defective. Replace the photoconductor.
Fuser is worn or defective. Replace the fuser.
Toner is in the paper path. Call for customer service.
Troubleshooting
91

Lexmark C530 Specifications

General

Brand	Lexmark
Model	C530
Category	Printer
Language	English