Lexmark C530 - Using the Standard Exit bin

Using the standard exit bin
The standard exit bin holds up to 250 sheets of 20 lb paper. It collects print jobs facedown.
The standard exit bin collects every type of paper and specialty media the printer supports. For more information,
see “Paper and specialty media guide” on page 37.
Attaching the standard exit bin
To attach the standard exit bin to the printer:
1 Align it with the opening on top of the printer and slide it down.
2 Press it down into place.
1
2
Using the paper stop
The standard exit bin has a paper stop which is used to keep paper from sliding off the back of the printer. It can be
set to two lengths, one for shorter paper sizes such as letter and A4, and one for longer sizes such as legal.
To extend the paper stop for short paper sizes:
1 Grasp the flap at the indentation nearest the top of the bin.
2 Rotate it back until it stops at a 90° angle.
Loading paper and specialty media
34