Note: Store the color supplies in a clean, cool, dark, dry place where the photoconductors will not be touched or
scratched.
Configuring the printer for black-only printing
1 Turn the printer off.
2 From the control panel, hold down and while turning the printer on.
3 Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
4 Press until Color Lock Out appears, and then press .
5 Press until On appears, and then press .
Submitting Selection appears.
6 Press until Exit Config Menu appears, and then press .
7 Wait until Remove all color supplies appears.
Removing the color supplies
Warning: Do not touch the shiny photoconductor drums.
1 Grasp the handhold.
Printing
51
To Next Page
Loading...
