2 Open the upper door fully. Grasp the inner door handle and pull to open both the inner and lower doors. Now
the photoconductors can be seen.
1
2
3 Lift the photoconductor release knob, and then pull the photoconductor out by the handle. Remove all three color
photoconductors.
4 Wrap each photoconductor in its original packaging or in a sheet of paper. Tape the packaging to secure it, but
do not let the tape touch the shiny photoconductor drums.
1 2
5 Place the photoconductors in their original box, or in any clean, sturdy box.
Printing
52
To Next Page
Loading...
