Lexmark C530 - Page 59

6
Optional 550-sheet tray (Tray 2)
7
Exit bin
Use the following table to locate instructions for a particular jam.
Note: To resolve any message, all media must be cleared from the entire media path.
Control panel message Area description See
200.xx Paper Jam
Jam at the input sensor “Clearing jams just beyond Tray 1” on
page 60
“Clearing Tray 2 jams” on page 61
“Clearing jams behind the inner door” on
page 62
“Jams under the photoconductors” on
page 62
200.xx Paper Jam
Jam in the manual feed slot “Clearing jams in the manual feeder” on
page 68
201.xx Paper Jam
Jam between an input sensor and the fuser
exit sensor
“Jams under the photoconductors” on
page 62
“Jams under the fuser or fuser cover” on
page 63
202.xx Paper Jam
Jam after the fuser exit sensor “Jams under and behind the fuser” on
page 64
“Clearing jams between the fuser and the
standard exit bin” on page 65
203.xx Paper Jam
Jam in the duplex page-turnaround area “Jams under the rollers near the fuser” on
page 65
230.xx Paper Jam
Jam in the duplex area “Jams in the duplex area” on page 66
241.xx Paper Jam
Jam in Tray 1 “Clearing jams just beyond Tray 1” on
page 60
242.xx Paper Jam
Jam in Tray 2 “Clearing Tray 2 jams” on page 61
250.xx Paper Jam
Jam in the multipurpose feeder “Clearing jams in the multipurpose feeder”
on page 67
Clearing jams
59