Lexmark C530 - Page 96

Menu item Description Settings
Color Saver Reduces the amount of toner used for graphics and images.
The amount of toner used for text is not reduced.
Notes:
• Off is the default setting.
• On overrides Toner Darkness settings.
• Color Saver is not supported in PPDS, and only partially
supported by the PCL emulation printer software.
On
Off
RGB Brightness Adjusts brightness in color outputs
Notes:
• 0 is the default setting.
• -6 is the maximum decrease. 6 is the maximum increase.
• This does not affect files where CMYK color specifications
are being used.
-6 to 6
RGB Contrast Adjusts contrast in color outputs
Notes:
• 0 is the default setting.
• This does not affect files where CMYK color specifications
are being used.
0 to 5
RGB Saturation Adjusts saturation in color outputs
Notes:
• 0 is the default setting.
• This does not affect files where CMYK color specifications
are being used.
0 to 5
Color Balance 
• Cyan
• Magenta
• Yellow
• Black
• Reset Defaults
Adjusts color in printed output by increasing or decreasing the
amount of toner being used for each color
Note: 0 is the default setting.
-5 to 5
Color Samples Prints sample pages for each of the RGB and CMYK color
conversion tables used in the printer
Notes:
• Selecting any setting prints the sample.
• Color samples consist of a series of colored boxes along
with the RGB or CMYK combination that creates the color
observed. These pages can be used to help decide which
combinations to use to get the desired printed output.
• The easiest way to access a complete list of these pages
is by using the Embedded Web Server, a series of resident
pages located in network printers. Type the IP address of
the printer in a browser window to see these pages.
sRGB Display
sRGB Vivid
Display—True Black
Vivid
Off—RGB
US CMYK
Euro CMYK
Vivid CMYK
Off—CMYK
Troubleshooting
96