Troubleshooting
Understanding the printer messages
Adjusting color
Wait for the process to complete.
Change [paper source] to [custom type name]
Try one or more of the following:
• Load the correct size and type of paper in the tray, and then select Finished changing paper on the printer control
panel to clear the message and continue printing. For non‑touch‑screen printer models, press
to confirm.
Note: Make sure the paper size and type are specified in the Paper menu on the printer control panel.
• Cancel the print job.
Change [paper source] to [custom string]
Try one or more of the following:
• Load the correct size and type of paper in the tray, and then select Finished changing paper on the printer control
panel to clear the message and continue printing. For non‑touch‑screen printer models, press
to confirm.
Note: Make sure the paper size and type are specified in the Paper menu on the printer control panel.
• Cancel the print job.
Change [paper source] to [paper type] [paper size]
Try one or more of the following:
• Load the correct size and type of paper in the tray, and then select Finished changing paper on the printer control
panel to clear the message and continue printing. For non‑touch‑screen printer models, press
to confirm.
Note: Make sure the paper size and type are specified in the Paper menu on the printer control panel.
• Cancel the print job.
Close door
Make sure the right side cover is installed, and then close the front and top doors to clear the message.
Troubleshooting 143
To Next Page
Loading...
Need help?
General
