Lexmark CS410 series User Manual

Print is too dark
Action Yes No
Step 1
a From the Quality menu on the printer control panel, select Color
Adjust.
b Resend the print job.
Is the print still too dark?
Go to step 2. The problem is solved.
Step 2
a From the Quality menu on the printer control panel, reduce the toner
darkness.
Note: 4 is the factory default setting.
b Resend the print job.
Is the print still too dark?
Go to step 3. The problem is solved.
Step 3
a From the printer control panel, set the paper type, texture, and weight
in the Paper menu to match the paper loaded in the tray.
b Resend the print job.
Is the tray set to the type, texture, and weight of the paper loaded?
Go to step 4. Change the paper
loaded in the tray to
match the paper type,
texture, and weight
specified in the tray
settings.
Step 4
a Depending on your operating system, specify the paper type, texture
and weight from Printing Preferences or from the Print dialog.
b Resend the print job.
Is the print still too dark?
Go to step 5. The problem is solved.
Step 5
Check if the paper loaded in the tray has texture or rough finishes.
Are you printing on textured or rough paper?
From the printer
control panel, set the
paper texture in the
Paper menu to match
the paper loaded on
the tray.
Go to step 6.
Troubleshooting 174

Lexmark CS410 series Specifications

General

Brand	Lexmark
Model	CS410 series
Category	Printer
Language	English