EasyManuals Logo

Lexmark CS410 series User Manual

Lexmark CS410 series
213 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
4 Push the card firmly into place as shown in the illustration.
Warning—Potential Damage: Improper installation of the card may cause damage to the card and the
controller board.
Note: The entire length of the connector on the card must touch and be flushed against the controller board.
5 Close the controller board access door.
Note: When the printer software and any hardware options are installed, it may be necessary to manually add
the options in the printer driver to make them available for print jobs. For more information, see
“Adding
available options in the print driver” on page 26.
Installing hardware options
Order of installation
CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb), and requires two or more
trained personnel to lift it safely.
Additional printer setup 22

Table of Contents

Other manuals for Lexmark CS410 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark CS410 series and is the answer not in the manual?

Lexmark CS410 series Specifications

General IconGeneral
Print TechnologyColor Laser
Print Speed (Letter, Black)32 ppm
Print Speed (Letter, Color)32 ppm
Print Resolution (Black)1200 x 1200 dpi
Print Resolution (Color)1200 x 1200 dpi
Processor Speed800 MHz
First Page Out Time (Black)9 seconds
Maximum Paper Size8.5 x 14 inches
Supported Operating SystemsWindows, Mac OS, Linux
Monthly Duty Cycle75, 000 pages
Input Capacity250 sheets
Output Capacity150 pages
ConnectivityUSB, Ethernet
First Page Out Time (Color)9.5 seconds
Recommended Monthly Page Volume750 to 3, 000 pages

Related product manuals