Lexmark CS410 series User Manual

Action Yes No
Step 6
a Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store paper in
its original wrapper until you use it.
b Resend the print job.
Is the print still too dark?
Go to step 7. The problem is solved.
Step 7
Replace the imaging kit, and then resend the print job.
Is the print still too dark?
Contact
customer
support.
The problem is solved.
Print is too light
Action Yes No
Step 1
a From the Quality menu on the printer control panel, select Color
Adjust.
b Resend the print job.
Is the print still too light?
Go to step 2. The problem is solved.
Step 2
a From the Quality menu on the printer control panel, increase the toner
darkness.
Note: 4 is the factory default setting.
b Resend the print job.
Is the print still too light?
Go to step 3. The problem is solved.
Step 3
From the printer control panel, set the paper type, texture, and weight in
the Paper menu to match the paper loaded in the tray.
Is the tray set to the type, texture, and weight of the paper loaded?
Go to step 4. Specify the paper type,
texture, and weight
from the tray settings
to match the paper
loaded in the tray.
Troubleshooting 175

Lexmark CS410 series Specifications

General

Print Technology	Color Laser
Print Speed (Letter, Black)	32 ppm
Print Speed (Letter, Color)	32 ppm
Print Resolution (Black)	1200 x 1200 dpi
Print Resolution (Color)	1200 x 1200 dpi
Processor Speed	800 MHz
First Page Out Time (Black)	9 seconds
Maximum Paper Size	8.5 x 14 inches
Supported Operating Systems	Windows, Mac OS, Linux
Monthly Duty Cycle	75, 000 pages
Input Capacity	250 sheets
Output Capacity	150 pages
Connectivity	USB, Ethernet
First Page Out Time (Color)	9.5 seconds
Recommended Monthly Page Volume	750 to 3, 000 pages