Lexmark CS410 series User Manual

Printing
Printing a document
Printing a document
1 From the Paper menu on the printer control panel, set the paper type and size to match the paper loaded.
2 Send the print job:
For Windows users
a
With a document open, click File > Print.
b Click Properties, Preferences, Options, or Setup.
c Adjust the settings, if necessary.
d Click OK > Print.
For Macintosh users
a
Customize the settings in the Page Setup dialog:
1 With a document open, choose File > Page Setup.
2 Choose a paper size or create a custom size to match the paper loaded.
3 Click OK.
b Customize the settings in the Print dialog:
1 With a document open, choose File > Print.
If necessary, click the disclosure triangle to see more options.
2 From the Print dialog and pop‑up menus, adjust the settings if necessary.
Note: To print on a specific paper type, adjust the paper type setting to match the paper loaded, or
select the appropriate tray or feeder.
3 Click Print.
Printing in black and white
From the printer control panel, navigate to:
> Settings > > Settings > > Print Settings > > Quality Menu > > Print Mode > > Black Only >
Adjusting toner darkness
Using the Embedded Web Server
1
Open a Web browser, and then type the IP address of the printer in the address field.
Printing 52

Lexmark CS410 series Specifications

General

Print Technology	Color Laser
Print Speed (Letter, Black)	32 ppm
Print Speed (Letter, Color)	32 ppm
Print Resolution (Black)	1200 x 1200 dpi
Print Resolution (Color)	1200 x 1200 dpi
Processor Speed	800 MHz
First Page Out Time (Black)	9 seconds
Maximum Paper Size	8.5 x 14 inches
Supported Operating Systems	Windows, Mac OS, Linux
Monthly Duty Cycle	75, 000 pages
Input Capacity	250 sheets
Output Capacity	150 pages
Connectivity	USB, Ethernet
First Page Out Time (Color)	9.5 seconds
Recommended Monthly Page Volume	750 to 3, 000 pages