Lexmark CS410 series User Manual

Paper and specialty media guide
Notes:
• Make sure that the paper size, type, and weight are set correctly on the computer or control panel.
• Flex, fan, and straighten specialty media before loading them.
• The printer may print at a reduced speed to prevent damage to the fuser.
• For more information on card stock and labels, see the Card Stock & Label Guide on the Lexmark support Web
site at
http://support.lexmark.com.
Using specialty media
Tips on using letterhead
• Use letterhead designed specifically for laser printers.
• Print a test page on the letterhead being considered for use before buying large quantities.
• Before loading letterhead, flex, fan, and straighten the stacks to prevent sheets from sticking together.
• Page orientation is important when printing on letterhead.
Source Printing Printable side Paper orientation
Trays
ABC
One‑sided Faceup Load the sheet
with the top edge
entering the
printer first.
Trays
ABC
Two‑sided Facedown Load the sheet
with the bottom
edge entering the
printer first.
Note: Check with the manufacturer or vendor to determine whether or not the preprinted letterhead is acceptable
for laser printers.
Paper and specialty media guide 42

Lexmark CS410 series Specifications

General

Print Technology	Color Laser
Print Speed (Letter, Black)	32 ppm
Print Speed (Letter, Color)	32 ppm
Print Resolution (Black)	1200 x 1200 dpi
Print Resolution (Color)	1200 x 1200 dpi
Processor Speed	800 MHz
First Page Out Time (Black)	9 seconds
Maximum Paper Size	8.5 x 14 inches
Supported Operating Systems	Windows, Mac OS, Linux
Monthly Duty Cycle	75, 000 pages
Input Capacity	250 sheets
Output Capacity	150 pages
Connectivity	USB, Ethernet
First Page Out Time (Color)	9.5 seconds
Recommended Monthly Page Volume	750 to 3, 000 pages