EasyManuals Logo

Lexmark CS410 series User Manual

Lexmark CS410 series
213 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
Loading the 250 and 550sheet tray
The printer has one 250-sheet tray (Tray 1) with an integrated manual feeder. The 250-sheet tray, the 650-sheet duo
tray, and the 550-sheet tray support the same paper sizes and types and are loaded in the same way.
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all
other trays closed until needed.
1 Pull out the tray completely.
Note: Do not remove trays while a job is printing or while Busy appears on the display. Doing so may cause a
jam.
2 If the paper is longer than lettersize paper, then squeeze and then slide the length guide at the back of the tray to
extend it.
2
1
Loading paper and specialty media 32

Table of Contents

Other manuals for Lexmark CS410 series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark CS410 series and is the answer not in the manual?

Lexmark CS410 series Specifications

General IconGeneral
Print TechnologyColor Laser
Print Speed (Letter, Black)32 ppm
Print Speed (Letter, Color)32 ppm
Print Resolution (Black)1200 x 1200 dpi
Print Resolution (Color)1200 x 1200 dpi
Processor Speed800 MHz
First Page Out Time (Black)9 seconds
Maximum Paper Size8.5 x 14 inches
Supported Operating SystemsWindows, Mac OS, Linux
Monthly Duty Cycle75, 000 pages
Input Capacity250 sheets
Output Capacity150 pages
ConnectivityUSB, Ethernet
First Page Out Time (Color)9.5 seconds
Recommended Monthly Page Volume750 to 3, 000 pages

Related product manuals