Lexmark CS410 series User Manual

Action Yes No
Step 4
a Depending on your operating system, specify the paper type, texture,
and weight from Printing Preferences or from the Print dialog.
b Resend the print job.
Is the print still too light?
Go to step 5. The problem is solved.
Step 5
Make sure that the paper has no texture or rough finishes.
Are you printing on textured or rough paper?
From the printer
control panel, set the
paper texture in the
Paper menu to match
the paper loaded in the
tray
Go to step 5.
Step 6
a Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store paper in
its original wrapper until you use it.
b Resend the print job.
Is the print still too light?
Go to step 7. The problem is solved.
Step 7
Replace the imaging kit, and then resend the print job.
Is the print still too light?
Contact
customer
support.
The problem is solved.
Print irregularities
) )
ABCDE
ABCDE
ABCDE
Leading edge
Trailing edge
Action Yes No
Step 1
a Move the width and length guides in the tray to the correct positions
for the size of the paper loaded in the tray.
b Resend the print job.
Do print irregularities still appear?
Go to step 2. The problem is solved.
Troubleshooting 176

Lexmark CS410 series Specifications

General

Print Technology	Color Laser
Print Speed (Letter, Black)	32 ppm
Print Speed (Letter, Color)	32 ppm
Print Resolution (Black)	1200 x 1200 dpi
Print Resolution (Color)	1200 x 1200 dpi
Processor Speed	800 MHz
First Page Out Time (Black)	9 seconds
Maximum Paper Size	8.5 x 14 inches
Supported Operating Systems	Windows, Mac OS, Linux
Monthly Duty Cycle	75, 000 pages
Input Capacity	250 sheets
Output Capacity	150 pages
Connectivity	USB, Ethernet
First Page Out Time (Color)	9.5 seconds
Recommended Monthly Page Volume	750 to 3, 000 pages