Lexmark CS410 series User Manual

Action Yes No
Step 1
a Check if there is packing material left on the imaging kit.
1 Remove the imaging kit.
2 Check if the packing material is properly removed from the imaging
kit.
Warning—Potential Damage: Do not expose the imaging kit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
Warning—Potential Damage: Do not touch the underside of the
imaging kit. This could damage the imaging kit.
3 Reinstall the imaging kit.
b Resend the print job.
Is the printer still printing blank pages?
Go to step 2. The problem is solved.
Step 2
Replace the imaging kit, and then resend the print job.
Is the printer still printing blank pages?
Contact
customer
support.
The problem is solved.
Printer is printing solid black pages
Action Yes No
Step 1
a Remove, and then reinstall the imaging kit.
Warning—Potential Damage: Do not expose the imaging kit to
direct light for more than 10 minutes. Extended exposure to light
may cause print quality problems.
Warning—Potential Damage: Do not touch the underside of the
imaging kit. This could damage the imaging kit.
b Resend the print job.
Is the printer printing solid black pages?
Go to step 2. The problem is solved.
Troubleshooting 178

Lexmark CS410 series Specifications

General

Print Technology	Color Laser
Print Speed (Letter, Black)	32 ppm
Print Speed (Letter, Color)	32 ppm
Print Resolution (Black)	1200 x 1200 dpi
Print Resolution (Color)	1200 x 1200 dpi
Processor Speed	800 MHz
First Page Out Time (Black)	9 seconds
Maximum Paper Size	8.5 x 14 inches
Supported Operating Systems	Windows, Mac OS, Linux
Monthly Duty Cycle	75, 000 pages
Input Capacity	250 sheets
Output Capacity	150 pages
Connectivity	USB, Ethernet
First Page Out Time (Color)	9.5 seconds
Recommended Monthly Page Volume	750 to 3, 000 pages