Lexmark CS510 User Manual

Use To
Coverage Estimator
Off
On
Provide an estimate of the percentage coverage of toner on a page. The estimate is
printed on a separate page at the end of each print job.
Note: Off is the factory default setting.
XPS menu
Use To
Print Error Pages
Off
On
Print a page containing information on errors, including XML markup errors.
Note: Off is the factory default setting.
PDF menu
Use To
Scale to Fit
Yes
No
Scale page content to fit the selected paper size.
Note: No is the factory default setting.
Annotations
Do Not Print
Print
Print annotations in a PDF.
Note: Do Not Print is the factory default setting.
PostScript menu
Use To
Print PS Error
On
Off
Print a page containing the PostScript error.
Note: Off is the factory default setting.
Lock PS Startup Mode
On
Off
Enable users to disable the SysStart file.
Note: Off is the factory default setting.
Font Priority
Resident
Flash/Disk
Establish the font search order.
Notes:
• Resident is the factory default setting.
• This menu item appears only when a formatted, non‑defective flash
memory option card or printer hard disk is installed.
• Make sure the flash memory option or printer hard disk is not
read/write‑, write‑, or password‑protected.
• Job Buffer Size must not be set to 100%.
Understanding the printer menus 117

Lexmark CS510 Specifications

General

Print Technology	Color Laser
Print Speed (Black)	32 ppm
Print Speed (Color)	32 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	up to 75, 000 pages
Standard Memory	512 MB
Maximum Memory	2560 MB
Processor Speed	800 MHz
Paper Input Capacity	250 sheets
Paper Input Capacity (Maximum)	1450 sheets
Paper Output Capacity	150 sheets
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB, Ethernet
Media Types Supported	Plain Paper, Card Stock, Labels, Envelopes
Media Sizes	A4, A5, A6, Executive, Legal, Letter
Mobile Printing	Lexmark Mobile Print
Toner Cartridges	Cyan, Magenta, Yellow, Black