Lexmark CS510 User Manual

Vertical voids appear on prints
Leading edge
Trailing edge
Action Yes No
Step 1
a Check if your software program is using a correct fill pattern.
b Resend the print job.
Do vertical voids appear on prints?
Go to step 2. The problem is solved.
Step 2
a From the Paper Menu on the printer control panel, check the paper
type and paper weight.
b Resend the print job.
Do vertical voids appear on prints?
Go to step 3. The problem is solved.
Step 3
Check if you are using a recommended type of paper.
a Load paper source with a recommended type of paper.
b Resend the print job.
Do vertical voids appear on prints?
Go to step 4. The problem is solved.
Step 4
a Remove, and then reinstall the imaging kit.
Warning—Potential Damage: Do not expose the imaging kit to
direct light for more than 10 minutes. Extended exposure to light
may cause print quality problems.
Warning—Potential Damage: Do not touch the underside of the
imaging kit. This could damage the imaging kit.
b Resend the print job.
Do vertical voids appear on prints?
Go to step 5. The problem is solved.
Step 5
Replace the imaging kit, and then resend the print job.
Do vertical voids appear on prints?
Contact
customer
support.
The problem is solved.
Troubleshooting 215

Lexmark CS510 Specifications

General

Print Technology	Color Laser
Print Speed (Black)	32 ppm
Print Speed (Color)	32 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	up to 75, 000 pages
Standard Memory	512 MB
Maximum Memory	2560 MB
Processor Speed	800 MHz
Paper Input Capacity	250 sheets
Paper Input Capacity (Maximum)	1450 sheets
Paper Output Capacity	150 sheets
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB, Ethernet
Media Types Supported	Plain Paper, Card Stock, Labels, Envelopes
Media Sizes	A4, A5, A6, Executive, Legal, Letter
Mobile Printing	Lexmark Mobile Print
Toner Cartridges	Cyan, Magenta, Yellow, Black