Lexmark CS510 User Manual

Solving print problems
Printing problems
Incorrect characters print
Action Yes No
Step 1
Make sure the printer is not in Hex Trace mode.
Note: If Ready Hex appears on the printer display, then turn off the
printer, and then turn it back on to deactivate Hex Trace mode.
Is the printer in Hex Trace mode?
Deactivate Hex Trace
mode.
Go to step 2.
Step 2
a From the printer control panel, select Standard Network or
Network [x], and then set SmartSwitch to On.
b Resend the print job.
Do incorrect characters print?
Contact
customer
support.
The problem is solved.
Job prints from the wrong tray or on the wrong paper
Action Yes No
Step 1
a Check if you are printing on paper that is supported by the tray.
b Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is solved. Go to step 2.
Step 2
a From the Paper menu on the printer control panel, set the paper size
and type to match the paper loaded in the tray.
b Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is solved. Go to step 3.
Step 3
a Depending on your operating system, open Printing Preferences or
the Print dialog, and then specify the paper type.
b Resend the print job.
Did the job print from the correct tray or on the correct paper?
The problem is solved. Go to step 4.
Troubleshooting 192

Lexmark CS510 Specifications

General

Print Technology	Color Laser
Print Speed (Black)	32 ppm
Print Speed (Color)	32 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	up to 75, 000 pages
Standard Memory	512 MB
Maximum Memory	2560 MB
Processor Speed	800 MHz
Paper Input Capacity	250 sheets
Paper Input Capacity (Maximum)	1450 sheets
Paper Output Capacity	150 sheets
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB, Ethernet
Media Types Supported	Plain Paper, Card Stock, Labels, Envelopes
Media Sizes	A4, A5, A6, Executive, Legal, Letter
Mobile Printing	Lexmark Mobile Print
Toner Cartridges	Cyan, Magenta, Yellow, Black