Action Yes No
Step 3
Print a menu settings page, and then check to see if the internal option is
listed in the Installed Options list.
Is the internal option listed in the menu settings page?
Go to step 4. Reinstall the internal
option.
Step 4
Check if the option is available in the printer driver.
It may be necessary to manually add the internal option in the printer
driver to make it available for print jobs. For more information, see
“Updating available options in the printer driver” on page 40.
Is the internal option available in the printer driver?
Go to step 5. Manually add the
internal option in the
printer driver.
Step 5
a Check if the internal option is selected.
Note: From the application you are using, select the internal option.
For Mac OS X version 9 users, make sure the printer is set up in
Chooser.
b Resend the print job.
Does the internal option operate correctly?
The problem is solved. Contact
customer
support.
Tray problems
Action Yes No
Step 1
a Open the tray and do one or more of the following:
• Check for paper jams or misfeeds.
• Check if the paper size indicators on the paper guides are aligned
with the paper size indicators on the tray.
• If you are printing on custom‑size paper, then make sure that the
paper guides rest against the edges of the paper.
• Make sure the paper is below the maximum paper fill indicator.
• Make sure paper lies flat in the tray.
b Check if the tray closes properly.
Is the tray working?
The problem is solved. Go to step 2.
Step 2
a Turn off the printer, then wait about 10 seconds, and then turn the
printer back on.
b Resend the print job.
Is the tray working?
The problem is solved. Go to step 3.
Troubleshooting 189
To Next Page
Loading...
Need help?
General
