Lexmark CS510 - PPDS Font Error [50]; Reinstall Missing or Unresponsive [Color] Cartridge [31.Xy]; Reinstall Missing or Unresponsive Black and Color Imaging Kit [31.Xy]; Reload Printed Pages in Tray [X]

To accept any and all of these risks, and to proceed with the use of non-genuine supplies or parts in your printer, press
and hold
and the # button on the printer control panel simultaneously for 15 seconds.
For non‑touch‑screen printer models, press
and simultaneously for 15 seconds to clear the message and
continue printing.
If you do not wish to accept these risks, then remove the third-party supply or part from your printer, and then install
a genuine Lexmark supply or part.
Note: For the list of supported supplies, see the “Ordering supplies” section of the User's Guide or visit
www.lexmark.com.
PPDS font error [50]
Try one or more of the following:
• From the printer control panel, select Continue to clear the message and continue printing. For non‑touch‑screen
printer models, press
to confirm.
• If the printer cannot find the requested font, then from the printer control panel, navigate to:
PPDS menu > Best Fit > On
The printer will find a similar font and reformat the affected text.
• Cancel the current print job.
Reinstall missing or unresponsive [color] cartridge [31.xy]
Try one or more of the following:
• Install the missing toner cartridge. For more information, see the “Replacing supplies” section of the User’s Guide.
• Remove the unresponsive cartridge, and then reinstall it.
Note: If the message appears after reinstalling the supply, then the cartridge may be defective. Replace the
cartridge.
Reinstall missing or unresponsive black and color imaging kit [31.xy]
Try one or more of the following:
• Install the missing imaging kit. For more information, see the “Replacing supplies” section of the User’s Guide.
• Remove the unresponsive imaging kit, and then reinstall it.
Note: If the message appears after reinstalling the supply, then the imaging kit may be defective. Replace the
imaging kit.
Reload printed pages in Tray [x]
Try any of the following:
• From the printer control panel, select Continue to clear the message and continue printing the second side of the
sheet. For non‑touch‑screen printer models, press
to confirm.
• Cancel the print job.
Troubleshooting 181