• Flex a stack of envelopes back and forth to loosen them. Straighten the edges on a level surface.
Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or
self‑stick adhesives. These envelopes may severely damage the printer.
5 Locate the maximum paper fill indicator and tab.
Note: Make sure the paper or specialty media is below the maximum paper fill indicator located on the paper
guides.
1
2
5
4
3
1 Width guide tab
2 Maximum paper fill indicator
3 Width guide
4 Feeder extender
5 Paper size indicator
6 Load the paper, and then adjust the width guide to lightly touch the edge of the paper stack.
• Load paper, card stock, and transparencies with the recommended printable side facedown and the top edge
entering first.
Loading paper and specialty media 53
To Next Page
Loading...
