Change history
Change history
November 16, 2018
• Controller board (MS622) (41X2512) was added to the Electronics 1 Parts catalog. Notes regarding
compatibility were also added.
• 41X1369 FRU PN was changed to 41X2526 on the Control panel Parts catalog.
September 14, 2018
• 41X1219 FRU PN was changed to 41X2605 on the MPF and standard tray Parts catalog.
September 7, 2018
• 41X1189 FRU PN was changed to 41X1627 on the Control panel Parts catalog.
• 41X1190 FRU PN was changed to 41X1628 on the Control panel Parts catalog.
• Control panel cover and buttons FRU descriptions were changed to Control panel covers on the Control
panel Parts catalog.
August 2, 2018
• Date security notice was updated.
• Software CD and Smart card were added to the Miscellaneous Parts catalog.
July 6, 2018
• Output device diagnostics section under Service menus was deleted.
May 4, 2018
• For the right cover removal, an image was added showing how to open the controller board access cover.
• Printhead assembly adjustment was updated to include a note referring to the Registration adjust procedure.
April 27, 2018
• Reference to print defects guide on the Repeating defects check was removed.
• Reference to second transfer roller on the Enable edge-to-edge (printing) was removed.
4600-830, -835, -895
Change history
19
To Next Page
Loading...
Need help?
General
