Lexmark MS321 Service Manual

Bottom removals
Power supply removal
CAUTION—POTENTIAL INJURY: This product uses a soft power switch. It does not physically
disconnect the input AC voltage. To avoid the risk of electrical shock, always remove the power cord
from the printer when removal of the input AC voltage is required.
CAUTION—SHOCK HAZARD: The low-voltage power supply (LVPS) may have residual voltage present.
To avoid the risk of electrical shock, do not touch its circuit components. Only handle it by its metal
housing.
1 Remove the rear cover. See “Rear door and cover removal” on page 234.
2 Disconnect the cable (A), and then remove the screws (B).
BBA
4600-830, -835, -895
Parts removal
216

Lexmark MS321 Specifications

General

Print Technology	Monochrome Laser
Memory	256 MB
Display	2-line LCD
Processor Speed	1 GHz
Maximum Monthly Duty Cycle	50, 000 pages
Recommended Monthly Page Volume	500 - 5000 pages
Input Capacity	250 sheets
Output Capacity	150 sheets
Connectivity	USB, Ethernet
Network Connectivity	Ethernet
Supported Operating Systems	Windows, Mac, Linux
Print Resolution	Up to 1200 x 1200 dpi