Lexmark Pro4000 Series User Manual

Ink Low
You may need to replace the specified ink cartridge soon. Try one or more of the following:
• Press
OK
or to clear the message and continue printing.
Note: Depending on your printer settings, you may not be allowed to continue printing until you replace the
specified cartridge.
• See the User's Guide or visit the Lexmark Support Web site at http://support.lexmark.com for a list of supported
ink cartridges.
Load [Paper Source] with [Size] Paper
Try one or more of the following:
• Load the specified paper in the tray.
• Press
OK
to clear the message and continue printing.
• Press to cancel the current job.
Load [Paper Source] with [Size] [Type] Paper
Try one or more of the following:
• Load the specified paper in the tray.
• Press
OK
to clear the message and continue printing.
• Press to cancel the current job.
Memory Device Error
Try one or more of the following:
• Remove the memory device, and then reinsert it into the card slot or USB port.
• Touch OK or press
OK
to clear the message.
Network [x] Software Error
[x] is the number of the network connection.
Try one or more of the following:
• Press
OK
to clear the message.
• Turn the printer off and then back on to reset the printer.
Paper Tray [x] Detected
Try one or more of the following:
• Press
OK
to clear the message.
• Use the arrow buttons to select Change Settings, and then select the paper size and paper type of the media loaded.
Press
OK
for each selection.
Troubleshooting 145

Lexmark Pro4000 Series Specifications

General

Brand	Lexmark
Model	Pro4000 Series
Category	All in One Printer
Language	English