Using the printer software
Minimum system requirements
The printer software requires up to 500MB of free disk space.
Supported operating systems
• Microsoft Windows 7 (SP1)
• Microsoft Windows Server 2008 (R2)
• Microsoft Windows Server 2003 (SP2)
• Microsoft Windows Vista (SP2)
• Microsoft Windows XP (SP3)
• Macintosh Intel OS X version 10.7.0 or later
• Macintosh Intel OS X version 10.6.0 or later
• Macintosh Intel OS X version 10.5.0 or later
• Macintosh Intel OS X version 10.4.4 or later
*
• Macintosh PowerPC OS X version 10.5.0 or later
• Macintosh PowerPC OS X version 10.4.0 or later
*
• Ubuntu Linux 11.10, 10.10, 10.04, 9.10, and 9.04
*
• Red Hat Enterprise Linux WS 6, WS 5, and WS 4
*
• Red Flag Linux Desktop 6.0
*
• SUSE Linux Enterprise Server 11 and 10
*
• SUSE Linux Enterprise Desktop 11 and 10
*
• Linux openSUSE 12.1, 11.4, 11.3, and 11.2
*
• Linpus Linux Desktop 9.6
*
• Fedora 16 and 14
*
• Debian GNU/Linux 6.0 and 5.0
*
*
The printer driver for this operating system is available only at http://support.lexmark.com.
Note: Information on additional operating system versions that are compatible with the printer may be available on
our Web site.
Using the Windows printer software
Software installed during printer installation
When you set up the printer using the installation software CD, all the necessary software was installed. You may have
chosen to install some additional programs. The following table provides an overview of various software programs
and what they can help you do.
If you did not install these additional programs during initial installation, then reinsert the installation software CD, run
the installation software, and then click Advanced Options > Install Additional Software.
Using the printer software 23
To Next Page
Loading...
Need help?
General
