Loading original documents into the ADF
Note: Make sure the paper is below the maximum fill line located on the edge of the paper guide. Overloading the
tray can cause paper jams.
1 Adjust the paper guides on the ADF input tray to the width of the original document.
2 Load the original document faceup and top edge first, until the tip of the document fits snugly into the ADF.
You can load the following paper sizes:
• Letter
• Legal
• 8 x 10 inches
• A4
• B5
• A5
• 20 x 25 cm
• Executive
• Oficio (Mexico)
• Folio
Note: Make sure that the paper size loaded matches the paper size setting in the scan options menu.
Loading paper and original documents 35
To Next Page
Loading...
