Lexmark T656 - IDB Delimiter (IDB Option 7)

111Operations - TN3270E SETUP: MISC SETTINGS > IDB Delimiter (IDB Option 7)
IDB Delimiter
(IDB Option 7)
This SCS Options > MISC Settings option defines the delimiter
used in the Advanced IDB command language to separate pro-
gramming commands.
The IDB option value is an ASCII character in the decimal range 32
- 126. Refer to “Appendix B - ASCII Character Table” on page 282
for a complete list of characters and their values.
Advanced IDB language to set factory default:
&%IDB_EDIT: OPTION 7:58:EXIT
Option Value IDB Value
: * 58 [colon (:)]