Lexmark T656 - Set Substituted Font ID

303Appendix - SCS TN5250eFont Table: Set Substituted Font ID
Set Substituted
Font ID
If a font ID sent from the system is not found in the font table, the
font is substituted with a similar font defined in a special area of the
font table. The first 7 font positions listed in the status printout
(&%IDB_STATUS) represent the substitution fonts for the following
areas.
Command:
Pitch area IBM font area Font table position
10 pitch: 1 - 65 1
12 pitch: 66 - 153 3
prop SP : 154 - 200 7
13 pitch: 201 - 210 4
15 pitch: 211 - 239 5
17 pitch: 250 - 257 6
5 pitch: 240 - 249 2
SETSUBFNT <IBM font number>:
NOTE: The font number must be a font number already present
in the font table.