207Operations - TN5250E SETUP: SCS OPTIONS > COR/APO SETTINGS > COR LSI Reduc (IDB Option
COR LSI Reduc
(IDB Option 127)
This SCS Options > COR/APO Settings option defines the line
spacing in Computer Output Reduction mode. The spacing is nor-
mally set to 70% of the normal line spacing (100%).
User IDB command:
LINSPRED <parameter>:
Parameter:
1 - 100 percent of normal line spacing
User IDB language to set factory default:
&%IDB_EDIT: LINSPRED 70:EXIT
Advanced IDB language to set factory default:
&%IDB_EDIT: OPTION 127:70:EXIT
Option Value IDB Value User IDB parameter
70% * [1..100] 70 70
To Next Page
Loading...
