84Operations - Common Setup: Reset ALL Def
Reset ALL Def This option restores ALL SCS/TNe emulation option settings to fac-
tory defaults.
Operator panel text Comments
Do Not Reset Do not restore any settings. This performs the same
action as if Back had been pressed in the operator
panel.
Reset ALL Restore ALL
SCS/TNe emulation option settings
to factory defaults. All sessions will be discon-
nected. All TNe sessions will have to be
reconfigured.
Other printer emulation settings (PCL, PS, IPDS,
etc.) are not reset when this option is selected.
To Next Page
Loading...
