Lexmark T656 - Additional TN5250 e Printer Commands Using IDB; Introduction

260TN5250e Printer Commands Using IDB: Introduction
Additional TN5250e Printer Commands
Using IDB
Introduction The IDB commands described here provide additional commands
for controlling the printer.
This chapter presents the syntax for creating these commands,
which must be sent from the AS/400 or iSeries in order to be recog-
nized, i.e. included in the SCS data stream.
The commands you may work with fall into three groups:
1 Paper Handling
2 Code Page Handling / Code Page 259
3 Miscellaneous
See “IDB Basics” on page 248 ff. for background information on
IDB.