115Operations - TN3270E SETUP: MISC SETTINGS > Format Ctrl Sup (IDB Option 177)
If Option 177 = 3 or 4:
All host generated CR, LF, NL and FF control codes are
suppressed and the auto-NL function is disabled.
Control codes can only be sent to the printer with one of
the transparent commands.
NOTE: The effect of the <CSC>+M command is reset per job.
<CSC> - M [m]:
After this command, all Host generated control codes
are processed and the auto-NL function operates as
normal.
Refer to “Appendix C - Special TN3270e IDB Commands” on
page 284 for more commands.
Advanced IDB language to set factory default:
&%IDB_EDIT: OPTION 177:0:EXIT
To Next Page
Loading...
