1
2
Press To
1
Start Color Start a color copy or scan, depending on which mode is selected.
2
Start Black Start a black-and-white copy or scan, depending on which mode is selected.
Saving settings
In a setting menu, an * appears next to the default setting. To change the setting:
1 Press or repeatedly until the setting you want appears.
2 Press :
• To save most settings. An * appears next to the saved setting.
• To select a temporary setting. An * appears next to the selected setting.
Note: The printer reverts from a temporary setting to the default setting after two minutes of inactivity or
if the printer is turned off.
Temporary settings
Copy Mode
– Copies
– Resize
– Lighter/Darker
– Quality
– Repeat Image
– N-Up
– Original Size
– Original Type
Scan Mode
– Quality
– Original Size
– Resize
To change the time-out feature:
a Press .
b Press or repeatedly until Tools appears.
c Press .
d Press or repeatedly until Device Setup appears.
Setting up the printer
27
To Next Page
Loading...
