Lexmark X5410 - Print Quality Issues

Did you find the problem?
Yes No
If USB Host Controller and USB Root Hub are not listed,
the USB port is not enabled. For more information, see
the computer documentation.
Contact the Customer Support Center.
1 Click Programs or All Programs Lexmark X5400
Series.
2 Click Solution Center.
3 Click the Contact Information tab.
Print troubleshooting
Improving print quality
These are possible solutions. Try one or more of the following:
CHECK PAPER
• Use the appropriate paper for the document. If you are printing photos or other high-quality images, for best
results use Lexmark Photo Paper or Lexmark PerfectFinish Photo Paper. Do not use Lexmark Premium Photo
Paper. Your print cartridges are not compatible with this type of paper.
• Use a paper that is a heavier weight or bright white.
SELECT A HIGHER PRINT QUALITY
1 Depending on your print job, press Copy Mode, Scan Mode, or Photo Card.
2 Press .
3 Press or repeatedly until Quality appears.
4 Press .
5 Press or repeatedly until the quality you want appears.
6 Press .
CHECK PRINT CARTRIDGES
If the document still does not have the print quality you want, follow these steps:
1 Align the print cartridges. For more information, see “Aligning print cartridges” on page 81. If print quality has
not improved, continue to the next step.
2 Clean the print cartridge nozzles. For more information, see “Cleaning the print cartridge nozzles” on
page 81. If print quality has not improved, continue to the next step.
3 Install the print cartridges. For more information, see “Installing print cartridges” on page 78.
4 Wipe the print nozzles and contacts. For more information, see “Wiping the print cartridge nozzles and contacts”
on page 82.
If print quality is still not satisfactory, replace the print cartridges. For more information, see “Ordering supplies”
on page 84.
Troubleshooting
91