c Type D:\setup.exe, where D is the letter of your CD or DVD drive.
In Windows XP
a Click Start Run.
b Type D:\setup.exe, where D is the letter of your CD or DVD drive.
2 Follow the instructions on the Welcome screen to set up the printer.
Finding a printer/print server located on remote
subnets
The printer software CD can automatically find the printers that are located on the same network as the computer.
If the printer and print server are located on another network (called a subnet), you must manually enter an IP address
during printer software installation.
Tips for using network adapters
• Make sure the adapter connections are secure.
• Make sure the computer is turned on.
• Make sure you entered the correct IP address.
Checking the port setting
Windows Vista users only
1 Click Control Panel Printers.
2 Right-click the Lexmark X5400 Series icon.
3 From the sidebar menu, select Properties.
4 Click the Ports tab.
5 Make sure:
• The port is set to a USB port.
• File is not set as the port.
Windows XP or 2000 users only
1 Click Start Settings Printers or Printers and Faxes.
2 Right-click the Lexmark X5400 Series icon.
3 From the sidebar menu, select Properties.
4 Click the Ports tab.
General networking
34
To Next Page
Loading...
