1.3Safety symbols
The safety symbols on the products show the areas where care and
attention is necessary.
The safety symbols that we use on the product or in the product
documentation have the following meanings:
Warning/Caution
Risk of injury and/or damage to equipment. An appropriate safety
instruction must be followed or a potential hazard exists.
Warning - Automatic start up
Risk of injury. The equipment can be started remotely and without
warning.
Warning - Dangerous voltage
Risk of injury. Identies possible sources of hazardous electrical
shock.
Warning - Heavy object
Risk of injury or damage to equipment. Identies a possible hazard
from a heavy object.
Warning - Hot surfaces
Risk of injury. Identies a surface capable of inicting burns through
contact.
Warning - Moving parts present
Risk of injury. Identies moving parts that may cause injury or dam
age to equipment.
Warning - Noise hazard
Risk of injury. Identies a possible source of noise above the recom
mended safe level.
Warning - Overpressure
Risk of increased pressure beyond permissible limit.
Warning - Risk of explosion
Risk of injury or damage to equipment. Identies a situation that
could result in an explosion.
Warning - Toxic material
Risk of injury or damage to the environment. Identies a source of
toxic gases, liquid or material.
Warning - Trip hazard
Risk of injury. Identies spilled liquids, trailing cords, pipes and other
low-lying objects that may result in slipping, tripping or falling.
8 300668736_002_C7 - © Leybold
Safety and compliance