Y-Drive Diode Check Scan and FG
This checks the output Buffers or the input side of the board.
-
SIDE
SIDE
P101
Any Connector to the Panel
(Buffer Output TP) Front Side
C18 +
Scan Signal TP
OL with Red Lead on Scan
1.13V with Black Lead on Scan
Diode Mode Reading from Floating Ground
FL1
FG5V TP (P106 pins 2 and 3)
VPP Signal TP
OL with Red Lead on Scan
0.67V with Black Lead on Scan
OL with Red Lead on Scan
0.53V with Black Lead on Scan
Any Output Buffer TP
Y-Scan
VPP
TP
P106
June 2011 42PW350 Plasma
102
0.80V with Black Lead on Scan
TP