P312 Right X Drive Connector from Z-SUB P203 Information
Voltage and Diode Mode Measurement (No Stand-By Voltages)
Pin Label Run Diode Check
P312 "X Drive Right" to “Z-SUB Left" P203
1 Gnd Gnd Gnd
2 Gnd Gnd Gnd
P312
3 VA *55V Open
4 VA *55V Open
1
* Note: This voltage will vary in accordance with Panel Label.
There are no Stand-By voltages on this connector.
June 2011 42PW350 Plasma
137
Diode Mode Readings taken with all connectors Disconnected. Black lead on Gnd. DVM in Diode Mode.
To Next Page
Loading...
