P211 Left X Drive Connector from Right X Drive P311 Information
Voltage and Diode Mode Measurement (No Stand-By Voltages)
Pin Label Run Diode Check
P211 "X Drive Left" to “X Drive Right" P311
1 Gnd Gnd Gnd
2 Gnd Gnd Gnd
1
P211
3 VA *55V Open
4 VA *55V Open
* Note: This voltage will vary in accordance with Panel Label.
There are no Stand-By voltages on this connector.
June 2011 42PW350 Plasma
134
Diode Mode Readings taken with all connectors Disconnected. Black lead on Gnd. DVM in Diode Mode.