P7 Connector to SMPS P811 Voltages and Diode Checks
Voltage and Diode Mode Measurements
P2 Location: Top Left
P7 "Z-SUS" to "SMPS" P811
Pin 1
Pin Label Run Diode Check
1~2 +Vs *200V OL
3~4 Gnd Gnd Gnd
6M5V5.06V 1.03V
* Note: Varies according to Panel Label
There are no Stand-By voltages on this connector
June 2011 42PW350 Plasma
78
Diode Mode Readings taken with all connectors Disconnected. DVM in Diode Mode.