IN START
1. AV/PC
2. ISM
3. Gamma
4. Power Save
5. APS Contrast
6. OrbitPixel
7. OrbitStep
8. OrbitTime
9. MRE(FMC)
10. DPS2
11. GRP
12. Module OSD
13. Module XDP
14. Formatter XDP
15. Reset Use Time
Module Name:
Rom Ver.
Temperature:
Panel Control
AV
Auto
0
Mode 0
95
2
2 step
120 sec.
Off
Off
Off
0
On
On
42PW350 Service Menu: Panel Control Shows Control Board Information
26
June 2011 42PW350 Plasma
At the bottom right you can see the Panel Model Number, Control board Software Version and the Panel Temperature.
42T3
42T3_4PV3A0
25.00 Celsius
1. Adjust Check
2. ADC Data
3. Power Off Status
4. System 1
5. System 2
6. Model Number D/L
7. Test Option
8. External ADC
9. Pattern Selection
10. Panel Control
11. Spread Spectrum
12. Sync Level
13. Stable Count
14. ODC Test
15. Power Error History
Model Name: 42PW350-UA
Serial Number: 010PTZK1F285
S/W Version:
MICOM Version
SPI Boot Version
BOOT Version
Touch Version
EDID Version (RGB)
EDID Version (HDMI)
Chip Type
3D ASIC Version
Debug Status
Module Rom Ver:
RF Emitter Versioni
UTT : 12
APP History Ver.:53810
PQL DB:LGE_PG_LGT10_xxN42
: 03.26.02.11
: 3.24.0
: 4.24.00
: 0.01.17
: 0.05 (0x00)
: 0.01
: 0.01
: SATURN 7
: 0.77
: RELEASE
: 42T3_4PV3A0
: VB091
UTT Reset
Unit’s Total Time
Select
Item 10
Cursor Right to activate.
Yes or No will appear.
UTT will not change until
“In Start” key is pressed.
Panel
Temperature
CTRL. Board
ROM Version
Panel Model
Number
Bring up the Service Menu using the Service Remote
by pressing “In-Start” enter password 0413 or 0000.
To Next Page
Loading...
