Preliminary:
Contact Information
Preliminar
Matters
S
ecifications
TOPICS TO BE DISCUSSED
Troubleshooting:
Plasma Overview, General Troubleshooting Steps,
Disassembly Instructions, Voltage and Signal Distribution
• Y-SUS Board Delivers Y-Scan, Logic Signals and FG5V to Y-Drive board.
Circuit Board Operation, Troubleshooting and Alignment of :
• Switch Mode Power Supply
Only RL_ON and M_On commands to SMPS
SUB board for bottom panel
• Y-Drive Board
There is no VSC adjustment on this Y-SUS board.
The Y-SUS receives VS, M5V from the Z-SUS.
-
-
.
• Control Board
Routes VA to the Z-SUB then to the bottom right X-Board.
Routes VS, M5V to the Y-SUS.
• 2 X Drive Boards (Left and Right)
• Main Board
•
11X17 Foldout Section used as a quick reference sheet
June 2011 42PW350 Plasma
2
.