P2 Connector to Y-SUS P206 Voltages and Diode Checks
Voltage and Diode Mode Measurements
P2 Location: Top Left
P2 "Z-SUS" to "Y-SUS" P206
1~4 ER_PASS 98V~102V OL
5n/c n/c n/c
6~7 +Vs *200V OL
Pin 1
8n/c n/c n/c
9~11 Gnd Gnd Gnd
12 M5V 5.06V 1.03V
* Note: This voltage will vary in accordance with Panel Label
There are no Stand-By voltages on this connector
June 2011 42PW350 Plasma
79
Diode Mode Readings taken with all connectors Disconnected. DVM in Diode Mode.