LG 42PW350 - Generic Plasma USB Automatic Software Download Instructions; Software Download and Copying; Software Upgrade Process

Generic Plasma USB Automatic Software Download Instructions
1) Download the Software File.
Currently Installed Version
Software Version found on
the USB Flash Drive
2) Copy new software (xxx.bin) into the root of the
Jump Drive. Make sure you have the correct
software file
File found on the USB
Flash Drive
software
file
.
3) With TV turned on, insert USB flash drive.
4) You can see the message
“TV Software Upgrade” (See figure on right)
5) Cursor left and highlight "START" Button and
Highlight Start Press Select
push “Enter” button using the remote control.
6) You can see the download progress Bar.
7) Do not unplug until unit has automatically
restarted.
8) When download is completed you will see
Highlight
Start
Press
Select
8)
When
download
is
completed
,
you
will
see
“COMPLETE”.
9) Your TV will be restarted automatically.
* CAUTION:
Do not remove AC power or the USB Flash Drive.
Do not turn off Power, during the upgrade
process.
June 2011 42PW350 Plasma
17
Software Files (when available), can be
downloaded from GCSC or GSFS.com