LG 42PW350 - Main Board Removing the LVDS Cable or Power Supply Connector

Main Board Removing the LVDS Cable or Power Supply Connector
(
1
)
Usin
g
y
our fin
g
ers and
p
ress in
g
entl
y
on the two lockin
g
tabs.
() gy g p g y g
Then rock the connector out of the plug.
(2) Pull the Cable from the Connector
by rocking back and forth.
P501 Main or P813 SMPS
If the Connector Locks have been
damaged and will not release, cut off tabs.
Use a thin ob
j
ect and slide strai
g
ht down
jg
as indicated by the arrows below and
release the locks.
CutCut
OffOff
June 2011 42PW350 Plasma
148